PUTHON Responder One Installationsanleitung PDF herunterladen (Seite 16)

H1/4

WHITE/BLUE (-) ACTIVATION INPUT

This input comes from the factory set to 1 activation pulse. This means

that it is necessary to have 1 ground pulse on the white/blue wire for

the remote start to activate or to deactivate manually. The same holds

true for the remote control activation when set to a two pulse setting it

is necessary to press the button twice for the remote start to activate

or deactivate.

Note:

When the activation pulse count can be programmed to 1, 2, or

3 pulses when changed it will affect both activation inputs; the White/

Blue wire and the remote control activation.

OPTIONAL

MOMENTARY SWITCH

H1/5

ORANGE (-) GROUND WHEN LOCKED OUTPUT

This wire supplies a (-)500 mA ground as long as the system is locked

and when the remote start is activated. (This feature can be turned off

by programming the anti-grind option Off). This output ceases as soon

as the system is unlocked. The GWA can be hooked up to an optional

starter kill/anti-grind relay control module, a voice module or any ac-

cessory that requires a ground when armed.

Note:

this feature is not available with the 1 button remote.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 53 54

Keine Kommentare

PUTHON Responder One Installationsanleitung Seite 16